
Add to Cart
12v power adapter UL SAA CE approved 150W AC DC Power Adapters Desktop power supply for LCD LED CCTVs
Output
| Voltage | 5.0-8.9V | 9.0-13.5V | 13.6-17.9V | 18.0-24.0V |
Current | 0 –10.0A | 0 –10A | 0 –10.0A | 0 –7.0A | |
Power(max.) | 100W | 120W | 150W | 150W | |
Ripple&noise(max.) | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | |
Efficiency | 80% | 85% | 85% | 85% | |
Voltage tolerance | ±5.0% | ||||
Lineregulation | ±1.0% | ||||
Load regulation | ±1.0% | ||||
Setup,rise time | 100ms / 115VAC at full load | ||||
Hold up time | 30ms/115VAC at full load | ||||
Input
| Voltage range | 90 ~ 264VAC | |||
Frequency range | 47 ~ 63Hz | ||||
AC Current(max.) | 2.5A/115VAC1.2A/230VAC | ||||
Inrush current(max.) | COLD START 30A/115VAC 60A/230VAC | ||||
Protection
| Over current | 120% ~ 150% type; TYPE: cut output reset: automatic recovery | |||
Over voltage | 120% ~ 150% type; TYPE: cut output reset: automatic recovery | ||||
Short circuit | TYPE: cut output reset: automatic recovery | ||||
Environment
| Working temp. | 0℃~ 40℃ | |||
Working humidity | 20% ~ 80% R.Hnon-condensing | ||||
Storage temp.,humidity | -20℃ ~ 70℃ 20% ~ 90% R.H | ||||
Safety &EMC | DielectricStrengthHi-Pot | Primary to secondary:3000Vac 10mA; Primary to shell:1500Vac 10mA; shell to secondary:1500Vac 10mA | |||
Insulation resistance | Primary to secondary, Primary to shell, shell to secondary; >100M Ohms / 500VDC | ||||
Leaking current | 0.25mA / 240VAC | ||||
Safety standard | UL GS SAA KCC BSI PSE CCC | ||||
EMC Standards | CE EN55022B FCC | ||||
Green mode | Noload Power Consumption Less Than 0.3W | ||||
Others
| MTBF | 50000hrs min. MIL-HDBK-217F (25 ) | |||
Dimension | 140*60.5*34.5mm(L*W*H) | ||||
Weight | 200g/pcs |